I'm trying to get hold of a hammer four? never heard of it before does anyone know where i can get one from?...
Comments (16) | Promote | Bookmark
What's a good makeshift cap for a tube of caulk?Tue, 22 Mar 2011 19:57:00 GMTOkay, so this problem doesn't keep me up nights, but it's still annoying. Most of the tubes of caulk available don't provide a cap to keep the caulk fresh if you don't use up the whole thing at the first use. What's a good way to use something I may already have around...
Comments (16) | Promote | Bookmark
I have a really big room & not enough furniture how do i fill i the space?Tue, 22 Mar 2011 21:03:00 GMTI have a really big room and not enough furniture how do i fill i the space?...
Comments (10) | Promote | Bookmark
Glue stick on tiles?Tue, 22 Mar 2011 20:27:00 GMTCan you tell me the best way to clean the floor before I put down the tiles that just stick on the floor. The cheap glue ones...
Comments (8) | Promote | Bookmark
Sharpening knives at home?Tue, 22 Mar 2011 21:02:00 GMTWOULD A METAL NAIL FILE WORK...
Comments (8) | Promote | Bookmark
I am cutting 83mm holes in tiles - should this be a wet or dry cut?Tue, 22 Mar 2011 22:00:00 GMTI am cutting 83mm holes in tiles - should this be a wet or dry cut?...
Comments (8) | Promote | Bookmark
When a light bulb blows why does my fuse blow as well?Tue, 22 Mar 2011 21:59:00 GMTWhen a light bulb blows why does my fuse blow as well?...
Comments (7) | Promote | Bookmark
Can you put ceramic tile over wood floors? If yes I was told that it wouldnt stay, even with cement board.?Tue, 22 Mar 2011 21:38:00 GMTCan you put ceramic tile over wood floors? If yes I was told that it wouldnt stay, even with cement board.?...
Comments (6) | Promote | Bookmark
Is this better then a typical pressure washer for my deck & patio?Tue, 22 Mar 2011 20:00:00 GMThttp://www.homedepot.com/webapp/wcs/stor…HUSKY 3-IN-1 HI-Speed Pressure Washer...
Comments (6) | Promote | Bookmark
Are 5/4 deck planks good for a shed floor?Tue, 22 Mar 2011 00:19:00 GMTI am planning a shed. took a look at prices and it costs only slightly more to use 5/4 planks like you use on a deck then the 3/4 pressure treated plywood i had originally planned. For the extra couple bucks i think it is a real good idea to put down some wood that stays intact on deck floors...
Comments (6) | Promote | Bookmark
How wide can a room be bofore needing a laminated beam?Tue, 22 Mar 2011 21:05:00 GMTIn construction how wide can a room be bofore needing a laminated beam or an I beam. looking to keep cost down on a house plan design I am working on, before I give to to a structeral engineer to check out....
Comments (6) | Promote | Bookmark
How do i solder & what do i need?Tue, 22 Mar 2011 21:46:00 GMTHow do i solder and what do i need?...
Comments (5) | Promote | Bookmark
Is it bad to burn wood with paint on it?Mon, 21 Mar 2011 20:46:00 GMTIs it bad to burn wood with paint on it?...
Comments (5) | Promote | Bookmark
Is there a type of tape that can stick on wood?Mon, 21 Mar 2011 21:49:00 GMTim trying to put flyers on wood but the duck tape isnt sticking on the wood? is there any tape that can stick on wood???...
Comments (5) | Promote | Bookmark
Just moved into a house with NO MAIL BOX?Mon, 21 Mar 2011 22:38:00 GMTwell, I just moved into a house and it has no mail box... I have never seen this before, lol I saw mailboxes for sale @ Walmart the other day, but IS THERE A MONTHLY FEE OR SOMETHING THAT I NEED TO PAY IN ORDER TO GET MY MAIL DELIVERED? thank u!! :)...
Comments (5) | Promote | Bookmark
How do I attach a heavy curtain rod to drywall?Tue, 22 Mar 2011 20:09:00 GMTThe part of the curtain rod that attaches to the wall keeps pulling out of the wall even though I'm using those plastic screw in plus, and then drilling the screw into that. Is there someting better? Does the screw have to be a certain length, although its the plug thats pulling out not the...
Comments (4) | Promote | Bookmark
Is there anywhere i can find a video on how to make timber windows?Tue, 22 Mar 2011 20:34:00 GMTpreferably box sash...
Comments (4) | Promote | Bookmark
Is there a way you can make homemade steel?Tue, 22 Mar 2011 21:57:00 GMTi have lots of different metals laying around and wanna do something with them.....
Comments (4) | Promote | Bookmark
How do i get grease out of my sink?Tue, 22 Mar 2011 19:52:00 GMTHow do i get grease out of my sink?...
Comments (4) | Promote | Bookmark
Do modern sabre saw blades fit into scroll saws made in .well it's pretty old ?Mon, 21 Mar 2011 23:59:00 GMTCraftsman Scrolling Sabre Saw. Model No. 315-17240.no clue about the year it was made....
Comments (3) | Promote | Bookmark
Can I leave old fabric on slip seat during reupholstery?Tue, 22 Mar 2011 03:32:00 GMTI am making my first attempt at reupholstering six basic dining room slip seats. I have purchased high quality home decor fabric and have my supplies all set. Do I actually need to remove the old fabric if I think the seat will still slip back into the chair frame? I am afraid once I remove the...
Comments (3) | Promote | Bookmark
Easiest way to sand hardwood floors. floors are uneven will palm sander work?Tue, 22 Mar 2011 21:28:00 GMTEasiest way to sand hardwood floors. floors are uneven will palm sander work?...
Comments (3) | Promote | Bookmark
How would I ship a train table?Mon, 21 Mar 2011 22:08:00 GMTChilds play train table.....not sure if worth shipping ......pretty sure the frame breaks down but the play board is 48x32 .......not sure how to ship this thing........
Comments (2) | Promote | Bookmark
Anyone use 5/4 deck boards for pergola rafters?Mon, 21 Mar 2011 22:32:00 GMTthinking about building an atttached pergola and for the weight and thickness I was thinking I didn't need 2x6's I was however going to use one for the ledger board but wanted to use the rounded ends of the 5/4 for the rafters, anyone done this, how is the twisting and warping when it...
Comments (2) | Promote | Bookmark
Does Aleene's fabric glue work on microfiber? Just got a new sofa & burned a hole in it. Help !?Tue, 22 Mar 2011 21:48:00 GMTDoes Aleene's fabric glue work on microfiber? Just got a new sofa and burned a hole in it. Help!!!?...
Comments (2) | Promote | Bookmark
Dress form? i need a good one that will last a long time. any advice?Mon, 21 Mar 2011 19:10:00 GMTHI! i'm a beginner at sewing and well i've taken on the task of sewing my costume for the fall festivals in town this year it's going to be a dress inspired by one of my favorite movies "Enchanted"... i figure if i take it nice and slow, and start pretty soon so i...
Comments (2) | Promote | Bookmark
Has anybody else had a bad experience with Amdega Conservatories?Mon, 21 Mar 2011 23:51:00 GMTI have had a number of leaks in my Amdega Conservatory but Amdega have been so slow to resolve the problems that I risk my warranty running out. Does anybody know how I can extend my warranty or indeed take Amdega to task?...
Comments (1) | Promote | Bookmark
I constructing a gate ?Tue, 22 Mar 2011 00:29:00 GMTI was constructing a gate with my friend vinoja and I was doing it really well because I am perfect. All of a sudden I went back to my mansion and fell off the roof! How much can I sue vinoja for? I'm thinknig 1million-5million?...
Comments (1) | Promote | Bookmark
Is there a free site on making slip cover for club chairs?Tue, 22 Mar 2011 21:49:00 GMTi want to make slipcovers for my chairs is there a free site that actually shows you step by step images and instructions, i don't sew well but i've seen it on tv were they drape fabric over the sofa and piece together and sew, i have tons of fabric cause i'm a fabric horder so i...
Comments (1) | Promote | Bookmark
How do I switch the Honeywell FocusPRO TH6110D thermostat from reading in Fahrenheit to Celsius, & vice vers?Tue, 22 Mar 2011 20:07:00 GMTHow do I switch the Honeywell FocusPRO TH6110D thermostat from reading in Fahrenheit to Celsius, and vice vers?...
I have had a number of leaks in my Amdega Conservatory but Amdega have been so slow to resolve the problems that I risk my warranty running out. Does anybody know how I can extend my warranty or indeed take Amdega to task?...
I was constructing a gate with my friend vinoja and I was doing it really well because I am perfect. All of a sudden I went back to my mansion and fell off the roof! How much can I sue vinoja for? I'm thinknig 1million-5million?...
i want to make slipcovers for my chairs is there a free site that actually shows you step by step images and instructions, i don't sew well but i've seen it on tv were they drape fabric over the sofa and piece together and sew, i have tons of fabric cause i'm a fabric horder so i...
How do I switch the Honeywell FocusPRO TH6110D thermostat from reading in Fahrenheit to Celsius, and vice vers?...
Childs play train table.....not sure if worth shipping ......pretty sure the frame breaks down but the play board is 48x32 .......not sure how to ship this thing........
thinking about building an atttached pergola and for the weight and thickness I was thinking I didn't need 2x6's I was however going to use one for the ledger board but wanted to use the rounded ends of the 5/4 for the rafters, anyone done this, how is the twisting and warping when it...
Does Aleene's fabric glue work on microfiber? Just got a new sofa and burned a hole in it. Help!!!?...
HI! i'm a beginner at sewing and well i've taken on the task of sewing my costume for the fall festivals in town this year it's going to be a dress inspired by one of my favorite movies "Enchanted"... i figure if i take it nice and slow, and start pretty soon so i...
Craftsman Scrolling Sabre Saw. Model No. 315-17240.no clue about the year it was made....
I am making my first attempt at reupholstering six basic dining room slip seats. I have purchased high quality home decor fabric and have my supplies all set. Do I actually need to remove the old fabric if I think the seat will still slip back into the chair frame? I am afraid once I remove the...